See the video here: Anne's Throw & Pillow
Beautiful Mink Coat transformed into a throw & pillow. Lovely embroidered coat lining used as the backing. Final Measurement 47 by 50 for the throw and 16 by 16 pillow. View Part II on tackling the intricate backing.
Watch the video here: Michele's full length tanuki coat transformation
This project consisted of a full length tanuki coat To be transformed into a throw and a pillow. The fur was in excellent condition. The fur was very thick and must have been super warm in its heyday. It also accompanied a headband, as told by the customer that she used to wear it mainly in the 80s.
The final measurement of the coat was 56 by 58. The pillow measured 16 by 16. The customer chose to use her lining for the back of the pillow as well as maintaining her monogram. She used a pre quilted backing for the throw.
See the video here: How to Monogram on Knits
I was asked to monogram an order of knitted Christmas stockings. Embroidery or monogramming on knitwear can be tricky. Many of today's embroidery machines have special hoops that will allow you to embroider different kinds of fabrics, sizes & specialty items. I don't have that kind of machine at home, so I use my Brother PE770 Embroidery Machine to do some of my monogramming. In this video I'm going to be showing you how I attach the knitwear without hoping it in the hoop. I used a reinforced cutaway stabilizer, pins, a ruler, and a pen. The software I used to create monograms is called Embird. It's an extremely powerful embroidery software. You can buy all the modules, or you can just purchase the modules that you're interested in. I highly recommend it it's amazing. Like any software when you first start out it can be challenging, but it's we're well worth it I have been using it for over 10 years. And what's great about it is it will not cost an arm and a leg. Updates are usually free, upgrades at a minimal cost. Hope this helps everyone out there.
Interested in Embird? Check it out here: Embird
Watch The Video Here: Baby Wilderness Quilt
I was contacted by a friend to make a custom quilt from a photograph that she presented to me. It turned out that it was a baby wilderness animal panel by Northcott fabrics. It's been discontinued and I could not find the fabric anywhere. So, I tried to recreate it in the best way that I could. I used 27 different embroidery threads, 33 different fabrics, and over 150 applicated pieces in this project. The final measurement of the quilt was 47 inches in width by 56 inches in length. It was a really fun project. I loved all the different use of colors in the fabrics as well as the threads.
Full length Mink Coat transformed into a throw and pillow.
Focus of this video: Working around the arm holes.
Final measurement of throw: 48by50 Pillow size 16 by 16
Watch the video here: Sable Coat Transformation
Debbie's coat was in excellent condition.!!! The fur was soft and supple and easy to work with. She chose to use her lining. The lining was beautifully embroidered with wonderful detail. For this particular coat I chose to have the fur all running in the same direction. The lining was highlighted with a beautiful rose quilting pattern. The border around the original backing was a contrasting brown color, that picked up the colors of the embroidery. The final dimensions of the throw was 52 inches by 53 inches.
Watch the video here: Marsha's Beaver Coat Transformation
Beaver Coat Transformed into a Throw (48 by 53) a & Pillow (18 by 18). Coat was in excellent condition. 3 inch border using graduated light to dark tones. Customer's lining was used as a backing for the pillow. Original monogram was cut out and saved for the customer, as directed.
Watch Brooke's Fur Transformation here!
Brooke's Lovely Mink Coat Transformed into a Throw & Teddy Bear It was such an honor to make this beautiful Mink Throw & Teddy Bear. The completed throw measures 48 inches wide by 50 inches long. The customer chose to keep her lining, as well as her monogram. With the remaining mink scraps Brooke opted to make a Memory Teddy Bear. We used the button from the coat and made the bear’s nose. The lining was also used on the paw pads and inner ears.
Teddy Bear Pattern: https://www.funkyfriendsfactory.com/melody-memory-bear-keepsake-toy-sewing-pattern
See the video here: Carol's 20 by 60 Bolster and Pompoms
This beautiful brown mink jacket was transformed into a 20 by 60 bolster. It is absolutely stunning! It will be used on her bed. The customer chose to use the lining of her coat as the backing of her bolster. The embroidery on the lining is so lovely and soft looking. It turned out beautiful! She also asked if I could make her six pom poms. The customer is a knitter. She's going to use those pom poms on the tops of the hats that she creates!! An amazing way to repurpose a fur.
See video here: Virginia's Mink & Seal Throws
The customer sent in two beautiful fur coats. She wanted to make a two throws.
The Brown Mink was in rough shape and needed a support material on the side of the throw. It was torn, was repaired multiple times prior. The original lining from the brown mink and monogram was used.
The Black Seal was in great condition and was so soft to the touch.
Final throw measurements:
Black Seal Throw- 44 by 50
Brown Mink Throw - 46 by 57
18 by 18 Pillows made from the leftover fur from both projects.
See Video Here: Denise's Fur Transformation
Denise sent in a beautiful black mink coat. The coat was well made and was in excellent condition. She wanted to make a throw as well as two bolster pillows. The bolster pillows were made from the sleeves. The original lining and monogram was used for the backing.
Final throw measurement: 44 by 52.
Final measurement for Bolster pillows: 6 inches in diameter and 18 inches in length.
This project consisted of a light tan mink coat, a dark brown knee length mink jacket, a striped tan mink vest with a leather backing, and one white mink sweater. The customer originally wanted two throws exactly the same. The throws would be given to family members. We tried a variation with all the furs together, and we opted to keep the dark brown mink with the light striped mink Together and the tan/light brown mink with the white mink border. There was enough leftover fur that we were able to make one 16 by 16 pillow and one14 by 14 pillow. I was able to use the leather from the striped mink vest to form the back of the larger pillow. I was also able to use the lining to form the back of the smaller pillow. Each pillow incorporated a monogram from the original jackets. The white mink was very delicate. It was obvious from when I removed the lining, it was repaired before. There were quite a number of patch work areas on the inside of the sweater. I used cold cloth to help support the white mink.
Watch the video here: Five Beautiful Repurposed Furs Coats
The customer sent me 5 fur coats that belonged to her grandmother. Each one of the coats will be transformed into a throw and given to different family members. There were four minks and one rabbit coat. The biggest challenge was trying to remove a very bad musty odor from the furs. I am so happy that I could create these wonderful family heirlooms.
See the video here: Mary's Mink Transformation
Mary's Knee length mink coat was just simply lovely. Mary wanted her mink coat to be transformed into a throw. The coat itself was in wonderful condition and the construction of the coat was stellar. The final size of the throw was 45.5 by 49 inches.
See the video here: Beaver Coat to a Beaver Throw
The customer wanted her Beaver coat transformed into a throw. The fur was in wonderful condition. It had a lovely fox collar, but the collar was very small and short. It would have been very difficult to incorporate it in the border of the throw, so we opted not to use it. It measures 45 by 55.
See the video here: Mink Coat Transformed Into A Throw With A Lovely Chevron Pattern.
This mink coat was unique, due to the Chevron pattern on the bottom of coat. The customer was given two choices on how the chevrons could be placed in her throw. She chose the triangular pieces to go in the corners of the throw. Her coat was in excellent shape and the mink was just lovely to work with. Overall size was 42 by 54.
See the video here: Making a Queen/ King Fur Blanket
This had to be the most challenging fur project that I have done so far. It consisted of:
· 2 Full Length Fox Coats
· 1 Full Length White Mink Coat
· 3 Mink Shawls ~ 2 Tan Mink and 1 Silver Mink
· 1 Patchwork Fox Short Waisted Jacket
I gave the customer a few different types of patterns to choose from. The first one was a patchwork blanket made of 12. 5 inch squares. The squares we're mixed in random order. The second blanket was also a patchwork blanket, but instead of random squares they were placed in a repeating order. The next pattern was a pattern made of 7 vertical strips with a patchwork like border. The strips were 84 inches long. Ultimately this was the pattern that the customer chose.
The repeat pattern is Brown Fox-White Mink- Silver Fox-Silver Mink- Silver Fox – White Mink – Brown Fox. All Strips were 12.5 by 84, except for the center panel, which was 8.5 by 84. Just not enough Silver Mink to make the 12.5 strip.
The side borders were 3 inches each side. The sides had to be narrower because there wasn't enough leftover fur to have a wider side border. The top and bottom border were 5.5 inches wide. One of the mink shawls was a little damaged and dried out. It wouldn't be able to hold the stitches very well. The patchwork fox jacket also had some damage to it. One particular fur that was in that coat was dried out. So, I had to work around those sections. The blanket would measure 90 by 95. Just a little shy of a king size blanket that the customer wanted. It is very heavy and will be extremely warm!
Watch the video here: Mink Jacket & Beaver Coat ~ Transformed to a Throw & Pillows
Fur: Mink, Beaver, Calf & Fox
The customer wanted to transform her Mink Jacket and her Beaver Coat into a throw and two pillows.
The Mink Jacket would make up the main throw, and the Beaver would be used as the border. The Mink Jacket was a short waisted jacket, so the amount of Mink that I had to work with was limited. The throw measures 47 by 48 inches.
The front of the two pillows were made from the Beaver Coat. They measure 16 by 16. I used the bottom Checkerboard Calf that was on the Beaver Coat as an accent to the zipper area of the pillows. The checkerboard Calf on the sleeves was too damaged to be used. The Fox was not used in the final product and was returned to the customer.
This Beaver coat was so beautiful and wonderful to work with. The Throw measured 47 by 50. I used a layer of batting as well as a layer of lightweight weft. That will help stabilize the throw, as it is heavy. With the left over fur we made a scarf with measures 10 by 70 inches. It can be used as a shawl or wrapped around like a scarf. I made two videos of the project. One focusing on the throw and part two on just the scarf.
You can see them here:
Part one: Making the Beaver Throw
Part two: Making the Scarf
Enjoy the process!
See Video here: Mini Memory Bear
Memory Bear made from three T-Shirts
Customer wanted all the words that were printed on the gray shirt to be part of the bear. The other two shirts where black and dark blue. I forgot to take the before photos (ugh).
It was a challenge as bear is Tiny.
The shirt read:
“World’s Greatest Farter Father”
The How: I used Pellon 911FF to stabilize the T-Shirt material. I used Wonder Under on the gray shirt.
I carefully cut out the all the letters except World’s. I wanted to keep that whole. I ironed the letters to the pattern pieces. Used monofilament to tack the letters onto the bear as well. The customer wanted the FARTER as the focal point. Due to the size of the bear, that was almost impossible. I had to separate the word.
Here is how I divided it up.
World’s- Tie
Greatest – Two letter on each arm and leg to spell out greatest.
Farter FART on the back & ER on the front
Father - Belly/Butt area
It was a fun project.
